Current Cost Support Forum

My reading on CC website is just random number that is *lower* than the reading I entered on 27th Dec on the website. I have never been able to get the meter reading to work accuratley, although I read the new optismart is supposed to be 100% accurate:




"The new OptiSmart monitor from Current Cost represents 100% accuracy* for monitoring and opens capabilities to monitor whatever sensor type you wish.
* 100% accuracy (relative to existing meter)

"

Both of my readings are also lower than they were yesterday

Back to pen, paper and excel spreadsheet...

Automan.

Automan

I just use an EnviR with two Optismarts, one for whole house and one for PV generation.

I use Techtoniq's Energy Station (as this was recommended by CC) to download the data and it is spot on when compared to the meter readings.

I don't use a bridge.

No Automan, it just shows the consumption for the day, I enter this into a spreadsheet which increments the meter reading which I check from time to time against the meter.

My Meters no longer seem to update on the dashboard and are stuck

Automan.

Meter has never really worked for me, they seem to start working, then go backwards or random, then end up same reading as originally entered. I have a ticket open with CC for a while, waiting for them to come back.

I wonder if the optismart itself needs to be reset?