Just tried setting the data on 8 and display on chn1 which worked first time.
Only load on this meter is 52 watts which matches closely the data from an IAM on the same load which reports 50 watts.
Output now being sent to http://pvoutput.org/list.jsp?userid=4392
Could you provide a step-by-step instruction for this please. It is not immediately obvious how this is done and the instruction booklet is pants.
I have a clamp-sensor on my mains meter and have an Optismart on my PV generation meter and can't seem to get both reading - it seems to be one or the other. Clearly I am missing a trick.