CCV1.4SCv0.01
The Current Cost Unit consists of 3 parts:- Energy Sensor & Clamp
- Power Adapter
- Display
CE Approvals
ETSI EN 300 220-2 V2.1.1(2006-04)
EN 50371 2002
EN 301489-3 v1.4.1 2002-08
EN 60215:1989+A1:1992+A2:1994
IEC 60950-1:2001(1st Edition) and/or EN 60950-1:2001+A11:2004
Current Cost Unit - Energy Sensor:
- Size: 12cm x 7cm x 3cm
- Self contained power
- Sensor Phases: One two or three
- Rated energy source: European 230VAC 50Hz
- Sensor Current Sensitivity: 50mA
- Sensor Maximum Rated Current: 100A
- Wireless Transmission Mode: 433MHz SRD band
- Modulation: digital
- Effective Duty Cycle: <10%
- ERP: 5mW
- Unique Identification Coding: pseudo-random (4096 code variants)
- ID allocation: auto-assigned at power-up
- Permanent Pairing to consumer's Display Unit: no
- WT Transmission Licence required: no
- Branded
Current Cost Unit - Clamp:
- Max 300A 600V
- Accommodate Max cable size 30mm diameter
- Branded
Current Cost Unit - Display:
- Size: 14cm x 9cm x 2.7 cm (7cm base)
- Internal power requirement: mains block adapter (nominal <1.8 watt)
- Physical Format : Table-top
- Energy Footprint displayed: Electricity.
- Gas, LPG, Oil option: no
- Receiver: 433MHz SRD band
- Sensor Coding recognition: pre-coded, forced search.
- Recognition method: sensor proximity
- Number of permitted sensors: one
- Display: Liquid Crystal segmented display
- Backlight: no
- LCD mode: Positive reflective ~ 12:00 view
- Main services: Energy, Current Cost
- Subordinate services: Clock Time (24hr), Room Temperature (0-29°C)
- WT Reception Licence required: no
- 24 hour rolling consumption (bar graph) display (social division into 3 x 8hr periods)
- PC connection for streaming data
- Tariff pre-set @ prevailing rate (issued by the Purchaser) ~ Adjustable to 99.9p
- NOTE: The Display format is NOT suitable for accuracy checking of tariff meter.
- Branded
- Retail Package Size: · 210mm x 90mm x 160mm