NetSmart - How to install

Installation Instructions - It is very important you follow these instructions in this order

  1. Disconnect the power supply from your monitor. The monitor will be powered by the NetSmarts’ power adaptor. DO NOT power the NetSmart with the monitors’ power adaptor. Please retain your monitors’ power adaptor for future use without the NetSmart device. If you do decide to dispose of your monitors’ power adaptor, please do so in an environmentally friendly manner.
  2. Connect the short cable from the NetSmart to the Current Cost monitor.
  3. Connect the network cable from the NetSmart to your network or broadband router.
  4. Connect the power supply to the NetSmart.
  5. Go to the following web address and register: http://my.currentcost.com
  6. Once registered, login to your account.
  7. Enter the NetSmart serial number found on the reverse of the device and click Activate.
  8. All done! Your energy usage is posted every 5 minutes
software downloads partners where to buy